FUTB Cut-Off Mark for Engineering (2026/2027)

The FUTB cut-off mark for Engineering is the minimum score a candidate needs before the Federal University of Technology, Babura (FUTB) in Jigawa State considers an application to its School of Engineering and Technology. Based on the latest figures available for the 2025/2026 session, Civil Engineering sits at about 160, while Electrical and Electronics Engineering and Mechanical Engineering sit at about 150. This guide explains what those numbers mean, how admission works, and how to prepare for the 2026/2027 session.

FUTB Cut-Off Mark for Engineering at a Glance

FUTB does not publish a single fixed number that applies to every engineering programme. Two levels of cut-off apply. The first is the institutional JAMB minimum, which decides who may register for screening. The second is the departmental cut-off, which is the score a candidate realistically needs to be placed in a particular course. The departmental figure can rise or fall depending on how many candidates choose the course and how many places are available.

Programme Degree Reported cut-off (2025/2026)
Civil Engineering B.Tech. 160
Electrical and Electronics Engineering B.Tech. 150
Mechanical Engineering B.Tech. 150

These figures are the most recent that circulate in admission notices and student listings. Earlier sessions show lower numbers, with Civil Engineering at 150 and the other two programmes at 140 in the 2024/2025 session. The upward movement reflects growing demand for engineering places in the northern part of the country and the general tightening of admission standards across federal universities.

What the Cut-Off Mark Means for Applicants

A cut-off mark is a floor, not a guarantee. A candidate who scores exactly 150 in UTME meets the entry threshold for screening, but admission is competitive. Candidates are ranked using a combined score that usually draws on the UTME result and the post-UTME screening result. A candidate who scores above the departmental cut-off, and who also performs well in screening, has a much stronger position than one who barely meets the minimum.

The official position of the university is that departmental cut-off marks are finalised after the screening exercise, once the number of applicants per course is known. For this reason, any figure published before the admission list appears should be read as a guide. The safest approach is to aim at least 10 to 20 marks above the reported figure for the course.

JAMB Subject Combination for Engineering at FUTB

Engineering candidates write the Use of English paper plus three subjects. The expected combination for Civil, Electrical and Electronics, and Mechanical Engineering is:

  • Use of English
  • Mathematics
  • Physics
  • Chemistry

A candidate who writes a wrong combination can be disqualified from the course even with a high score, so the subjects should be confirmed on the JAMB registration slip before the exam.

O’Level Requirements for Engineering

A candidate must hold at least five credit passes in a single sitting or at most two sittings in WAEC, NECO or an equivalent examination. The subjects that matter for engineering are English Language, Mathematics, Physics and Chemistry, together with one additional relevant subject such as Further Mathematics, Biology or Technical Drawing. A pass in Mathematics and English alone is not enough for engineering; the science credits are compulsory.

Candidates should also check that their JAMB registration details match the names and dates on their O’Level certificates. Mismatches are a common reason for delays during document verification.

Post-UTME Screening at FUTB

FUTB runs its own admission screening after the UTME. Candidates who choose the university as first choice and score at least 150 in UTME are generally eligible to register. The process follows a fixed order:

  1. Visit the official FUTB admissions portal and open the post-UTME registration page.
  2. Enter the JAMB registration number to confirm eligibility.
  3. Complete the biodata form and enter the O’Level result details.
  4. Upload the required documents, which typically include a passport photograph, the JAMB result slip and the O’Level result.
  5. Pay the screening fee and print the confirmation slip.
  6. Attend the screening exercise on the date shown on the slip.

The screening fee and exact dates change each session, so they must be confirmed from the current notice on the university website rather than from older posts.

How the Admission Score Is Calculated

Federal universities commonly combine the UTME score and the screening score into an aggregate. In a typical arrangement, the UTME score is scaled to 50 and the screening score to 50, giving a total out of 100. Candidates are then ranked within each course, and the highest-ranked candidates fill the available places. Whether FUTB applies this exact weighting in a given year depends on the notice for that session, but the principle is the same: a strong UTME score alone does not decide admission, and a strong screening result can help a candidate whose UTME score is close to the cut-off.

Admission is also split between merit, catchment area and educationally less developed states. Because FUTB is located in Jigawa State, candidates from the catchment area and from educationally less developed states can be considered at lower thresholds than merit candidates. This explains why the departmental cut-off for the same course can look different for different categories of applicants.

Direct Entry Into Engineering

Direct Entry applicants join the programme in 200 level. A holder of a National Diploma at lower credit or better, or a candidate with the required IJMB or A’Level results in Mathematics, Physics and Chemistry, may be considered. Direct Entry candidates also register through JAMB and then complete the university screening. Requirements can change between sessions, so the current notice should always be checked before registration.

Courses Offered in the School of Engineering and Technology

The School of Engineering and Technology awards Bachelor of Technology degrees. The programmes that appear most often in admission listings are Civil Engineering, Electrical and Electronics Engineering and Mechanical Engineering. Because FUTB is a university of technology, the courses place weight on practical training, workshop exercises and industrial attachment, in addition to lectures. Students normally take part in the Students Industrial Work Experience Scheme (SIWES), which gives them exposure to real engineering work before graduation.

How to Raise Your Chances of Getting In

Candidates can improve their position in several practical ways, none of which depend on outside influence.

  • Choose FUTB as first choice. The university gives priority to candidates who choose it first on the JAMB portal.
  • Score well in the four core subjects. Mathematics and Physics carry the most weight in engineering courses, so extra practice in these two subjects pays off in both UTME and screening.
  • Prepare for the screening. Past questions in English, Mathematics, Physics and Chemistry help, since the screening usually tests the same subjects as the UTME.
  • Keep documents ready. Scanned copies of the O’Level result, birth certificate or declaration of age, and state of origin letter should be ready before registration opens.
  • Consider a second course. A candidate who narrowly misses Civil Engineering may still qualify for Mechanical or Electrical and Electronics Engineering, which have lower reported cut-off marks.

Change of Course and Remedial Options

A candidate who does not meet the cut-off for engineering can request a change of course through the JAMB portal during the admission period, subject to meeting the requirements of the new course. Some candidates also choose the university’s remedial or pre-degree programme, which prepares students who lack the required results and leads to admission into 100 level after successful completion. Remedial admission is separate from the main admission list and has its own form, fee and requirements.

Why Cut-Off Marks Differ Between Websites

Students often see different numbers for the same course. This happens because some listings report the institutional JAMB minimum, some report the departmental cut-off, and others carry figures from an earlier session. A few pages also give a range, such as 150 to 170, to cover different programmes and categories of candidates. The university itself does not always release a full departmental list publicly, which leaves room for estimates. Candidates should therefore treat 150 as the minimum entry level and 160 or more as a safer target for Civil Engineering.

Frequently Asked Questions

What is the minimum JAMB score for FUTB?

The institutional minimum for post-UTME screening is 150. Some engineering courses, especially Civil Engineering, are reported at a higher figure of about 160.

Can a candidate with 140 get into Engineering at FUTB?

The 140 mark appeared in earlier sessions, but the more recent figures place the minimum at 150. A candidate with 140 should not rely on engineering admission and should consider a lower-demand course or the remedial route.

Does FUTB accept second-choice candidates?

Second-choice candidates can be considered when places remain after first-choice candidates are placed, but first-choice candidates have priority. Engineering places are limited, so selecting FUTB as first choice is the better option.

Is the cut-off mark the same every year?

No. The figure changes with the number of applicants, the available quota and the policy set for the session. It has risen slightly in recent years.

Where should candidates confirm the final figure?

The official FUTB admissions notice and the JAMB admission portal are the reliable references. Third-party lists are useful for planning but are not final.

Summary

The FUTB cut-off mark for Engineering is about 160 for Civil Engineering and about 150 for Electrical and Electronics Engineering and Mechanical Engineering in the 2025/2026 session, with a general JAMB minimum of 150 for post-UTME screening. Candidates aiming for the 2026/2027 session should target a UTME score of 170 or more, hold the right O’Level credits in English, Mathematics, Physics and Chemistry, choose FUTB as first choice and prepare for the screening exercise. Because the university finalises departmental figures after screening, scoring comfortably above the reported cut-off is the surest way to secure a place.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top